Menu
Search
Filters
Close
Menu

Products tagged with 'dana 44 front axle'

Currie 44 JL Front Performance Axle

Currie 44 - Jeep Wrangler JL Front Axle Assembly

$6,405.00 $5,444.25

The Currie 44 front axle assembly is a direct bolt-in assembly for 2018 and newer Jeep Wrangler JL Vehicles. Featuring Rubicon width for tire clearance, a significantly stronger center casting, axle tubes, forged knuckles, and chromoly axles, the Currie 44 is designed for heavy off-road with up to 37-inch tall tires.


Currie 44 Features:

  • Direct Bolt-in Fit for Wrangler JL
  • 68 in. JL Rubicon Width (+1.5 in. Over Non-Rubicon Models)
  • Currie High-Pinion Reinforced Center Section
  • 3 in. Diameter, .5 in. Wall DOM Axle Tubes
  • Currie Forged JL Inner Knuckles
  • 4340 Chromoly Axles Inner and Outer Axles
  • Steering Geometry and Brackets Setup for Lifted Vehicles
  • Uses Proven and Readily Available JK 44 Gears and Locker
  • Satin Black Powder Coat Finish for Long Lasting Protection
  • Retains the Vehicle's Stock Steering Knuckle Assemblies, Brakes, and Wheels
  • See Notes Below for Installation Requirements

*** SELECT OPTIONS TO BUILD AND PRICE ***
Currie 44 Gladiator Front Axle Assembly

Currie 44 - Jeep Gladiator Front Axle Assembly

$6,405.00 $5,444.25

The Currie 44 high-pinion front performance axle is a direct bolt-in assembly for 2020 and newer Jeep Gladiator Vehicles. Featuring a significantly stronger center casting, axle tubes, forged knuckles, and chromoly axles, the Currie 44 is designed for heavy off-road with 37-inch tall tires.


Currie 44 Features:

  • Direct Bolt-in Fit for Gladiator JT
  • 68 in. Factory Gladiator Rubicon Width
  • Currie High-Pinion Reinforced Center Section
  • 3 in. Diameter, .5 in. Wall DOM Axle Tubes
  • Currie Forged Gladiator Inner Knuckles
  • 4340 Chromoly Axles Inner and Outer Axles
  • Steering Geometry and Brackets Setup for Lifted Vehicles
  • Uses Proven and Readily Available JK 44 Gears and Locker
  • Available Fully-Bracketed or as Builder Series (no Brackets)
  • Fully-Bracketed Axles Feature Satin Black Powder Coat Finish

    for Long-Lasting Protection

  • Retains the Vehicle's Stock Steering Knuckle Assemblies, Brakes, and Wheels
  • See Notes Below for Installation Requirements

*** SELECT OPTIONS TO BUILD ***
Currie 44 JK Front Axle Assembly

Currie 44 - Jeep Wrangler JK Front Axle Assembly

$6,405.00 $5,444.25

The Currie 44 front axle assembly is a direct bolt-in assembly for 2007 thru 2017 Jeep Wrangler JK/JKU Vehicles. Featuring significantly stronger center casting, axle tubes, forged knuckles, and chromoly axles, the Currie 44 is designed for heavy off-road with up to 37-inch tall tires.


Currie 44 Features:

  • Direct Bolt-in Fit for Wrangler JK
  • Stock 65.375 in. JK Width
  • Currie High-Pinion Reinforced Center Section
  • 3 in. Diameter, .5 in. Wall DOM Axle Tubes
  • Currie Forged JK Inner Knuckles
  • 4340 Chromoly Axles with 1350 U-Joints
  • Accepts Stock JK Outer Knuckle Assemblies
  • Steering Geometry and Brackets Setup for stock height or Lifted Vehicles
  • Satin Black Powder Coat Finish for Long Lasting Protection
  • Retains the Vehicle's Stock Tie Rod, Steering Knuckle Assemblies, Brakes, and Wheels
  • See Notes Below for Installation Requirements

*** SELECT OPTIONS TO BUILD AND PRICE ***
Currie 44 Complete JK Front Axle Assembly

Currie 44 - Fits 2007-2018 Jeep Wrangler JK - Front Axle - 4.10 Gear Ratio - Eaton ELocker - CE-KF4400E41

$6,405.00 $5,444.25

The Currie 44 front axle assembly is a direct bolt-in assembly for 2007 thru 2017 Jeep Wrangler JK/JKU Vehicles. Featuring a significantly stronger center casting, axle tubes, forged knuckles, and chromoly axles, the Currie 44 is designed for heavy off-road with up to 37-inch tall tires.


Currie 44 Features:

  • Direct Bolt-in Fit for Wrangler JK
  • Stock 65.375 in. JK Width
  • 4.10 Gear Ratio
  • Eaton ELocker
  • Currie High-Pinion Reinforced Center Section
  • 3 in. Diameter, .5 in. Wall DOM Axle Tubes
  • Currie Forged JK Inner Knuckles
  • 4340 Chromoly Axles with 1350 U-Joints
  • Accepts Stock JK Outer Knuckle Assemblies
  • Steering Geometry and Brackets Setup for stock height or Lifted Vehicles
  • Satin Black Powder Coat Finish for Long Lasting Protection
  • Retains the Vehicle's Stock Tie Rod, Steering Knuckle Assemblies, Brakes, and Wheels
  • See Notes Below for Installation Requirements

*** SELECT OPTIONS TO BUILD AND PRICE ***
Currie 44 Complete JK Front Axle Assembly

Currie 44 - Fits 2007-2018 Jeep Wrangler JK - Front Axle - 4.56 Gear Ratio - Eaton ELocker - CE-KF4400E45

$6,405.00 $5,444.25

The Currie 44 front axle assembly is a direct bolt-in assembly for 2007 thru 2017 Jeep Wrangler JK/JKU Vehicles. Featuring a significantly stronger center casting, axle tubes, forged knuckles, and chromoly axles, the Currie 44 is designed for heavy off-road with up to 37-inch tall tires.


Currie 44 Features:

  • Direct Bolt-in Fit for Wrangler JK
  • Stock 65.375 in. JK Width
  • 4.56 Gear Ratio
  • Eaton ELocker
  • Currie High-Pinion Reinforced Center Section
  • 3 in. Diameter, .5 in. Wall DOM Axle Tubes
  • Currie Forged JK Inner Knuckles
  • 4340 Chromoly Axles with 1350 U-Joints
  • Accepts Stock JK Outer Knuckle Assemblies
  • Steering Geometry and Brackets Setup for stock height or Lifted Vehicles
  • Satin Black Powder Coat Finish for Long Lasting Protection
  • Retains the Vehicle's Stock Tie Rod, Steering Knuckle Assemblies, Brakes, and Wheels
  • See Notes Below for Installation Requirements

*** SELECT OPTIONS TO BUILD AND PRICE ***
Currie 44 Complete JK Front Axle Assembly

Currie 44 - Fits 2007-2018 Jeep Wrangler JK - Front Axle - 4.88 Gear Ratio - Eaton ELocker - CE-KF4400E48

$6,405.00 $5,444.25

The Currie 44 front axle assembly is a direct bolt-in assembly for 2007 thru 2017 Jeep Wrangler JK/JKU Vehicles. Featuring a significantly stronger center casting, axle tubes, forged knuckles, and chromoly axles, the Currie 44 is designed for heavy off-road with up to 37-inch tall tires.


Currie 44 Features:

  • Direct Bolt-in Fit for Wrangler JK
  • Stock 65.375 in. JK Width
  • 4.88 Gear Ratio
  • Eaton ELocker
  • Currie High-Pinion Reinforced Center Section
  • 3 in. Diameter, .5 in. Wall DOM Axle Tubes
  • Currie Forged JK Inner Knuckles
  • 4340 Chromoly Axles with 1350 U-Joints
  • Accepts Stock JK Outer Knuckle Assemblies
  • Steering Geometry and Brackets Setup for stock height or Lifted Vehicles
  • Satin Black Powder Coat Finish for Long Lasting Protection
  • Retains the Vehicle's Stock Tie Rod, Steering Knuckle Assemblies, Brakes, and Wheels
  • See Notes Below for Installation Requirements

*** SELECT OPTIONS TO BUILD AND PRICE ***
Categories
Popular tags
Contacts
  • +1 714-528-6957
  • +1 (Fax) 951-549-0267
Information
Copyright © 2025 Currie 4x4. All rights reserved.