Products tagged with 'jeep axle'

The Currie 44 front axle assembly is a direct bolt-in assembly for 2007 thru 2017 Jeep Wrangler JK/JKU Vehicles. Featuring a significantly stronger center casting, axle tubes, forged knuckles, and chromoly axles, the Currie 44 is designed for heavy off-road with up to 37-inch tall tires.

Currie 44 Features:

• Direct Bolt-in Fit for Wrangler JK
• Stock 65.375 in. JK Width
• 4.88 Gear Ratio
• ARB Air Locker
• Currie High-Pinion Reinforced Center Section
• 3 in. Diameter, .5 in. Wall DOM Axle Tubes
• Currie Forged JK Inner Knuckles
• 4340 Chromoly Axles with 1350 U-Joints
• Accepts Stock JK Outer Knuckle Assemblies
• Steering Geometry and Brackets Setup for Stock Height or Lifted Vehicles
• Satin Black Powder Coat Finish for Long Lasting Protection
• Retains the Vehicle's Stock Tie Rod, Steering Knuckle Assemblies, Brakes, and Wheels
• See Notes Below for Installation Requirements

*** SELECT OPTIONS TO BUILD AND PRICE ***

The Currie 44 front axle assembly is a direct bolt-in assembly for 2007 thru 2017 Jeep Wrangler JK/JKU Vehicles. Featuring a significantly stronger center casting, axle tubes, forged knuckles, and chromoly axles, the Currie 44 is designed for heavy off-road with up to 37-inch tall tires.

Currie 44 Features:

• Direct Bolt-in Fit for Wrangler JK
• Stock 65.375 in. JK Width
• 5.13 Gear Ratio
• ARB Air Locker
• Currie High-Pinion Reinforced Center Section
• 3 in. Diameter, .5 in. Wall DOM Axle Tubes
• Currie Forged JK Inner Knuckles
• 4340 Chromoly Axles with 1350 U-Joints
• Accepts Stock JK Outer Knuckle Assemblies
• Steering Geometry and Brackets Setup for Stock Height or Lifted Vehicles
• Satin Black Powder Coat Finish for Long Lasting Protection
• Retains the Vehicle's Stock Tie Rod, Steering Knuckle Assemblies, Brakes, and Wheels
• See Notes Below for Installation Requirements

*** SELECT OPTIONS TO BUILD AND PRICE ***

The Currie 44 front axle assembly is a direct bolt-in assembly for 2007 thru 2017 Jeep Wrangler JK/JKU Vehicles. Featuring a significantly stronger center casting, axle tubes, forged knuckles, and chromoly axles, the Currie 44 is designed for heavy off-road with up to 37-inch tall tires.

Currie 44 Features:

• Direct Bolt-in Fit for Wrangler JK
• Stock 65.375 in. JK Width
• 5.38 Gear Ratio
• ARB Air Locker
• Currie High-Pinion Reinforced Center Section
• 3 in. Diameter, .5 in. Wall DOM Axle Tubes
• Currie Forged JK Inner Knuckles
• 4340 Chromoly Axles with 1350 U-Joints
• Accepts Stock JK Outer Knuckle Assemblies
• Steering Geometry and Brackets Setup for Stock Height or Lifted Vehicles
• Satin Black Powder Coat Finish for Long Lasting Protection
• Retains the Vehicle's Stock Tie Rod, Steering Knuckle Assemblies, Brakes, and Wheels
• See Notes Below for Installation Requirements

*** SELECT OPTIONS TO BUILD AND PRICE ***

The Currie HD60 front axle assembly for 2007 thru 2018 Wrangler JK/JKU is a direct bolt-in solution that delivers next-level strength and reliability. The HD60 features our massively reinforced rotated 60-series high-clearance center section, 3.5-inch tubes, chromoly axles, and Currie heavy-duty forged inner knuckles that accept the factory outer JK steering and brake assemblies. Upgrade to an HD60 and enjoy your off-road adventures without worrying about front-end failure.

Details:

• 65.375 in. Factory JK Width
• 4.56 Gear Ratio
• Eaton ELocker
• HD60 High-Clearance Center Section with Rotated Cover Improves Obstacle Slide-Over
• High Volume Flow-Thru Pinion Oiling System Keeps Bearings Bathed in Cool Oil
• Rock Slider Low-Friction Skid Plate Glides Over Rocks
• 3.5 x .375-inch DOM Axle Tubes are Twice the Strength of the Stock Tubes
• Currie Chromoly 35-Spline Inner and 32-Spline JK Outer Axles
• Currie Heavy-Duty Forged JK Inner Knuckles
• Currie Heavy-Gauge Laser Cut Brackets
• Upgraded 1350 Pinion Yoke
• Currie Rock-Proof Nodular Iron Differential Cover
• Satin Black Powder Coat Finish For Long Lasting Protection
• Retains the Vehicle's Stock Outer Steering Knuckles, Brake Assemblies, and Wheels
• Requires Aftermarket High-Clearance Tie Rod Assembly (see note below)

The Currie HD60 front axle assembly for 2007 thru 2018 Wrangler JK/JKU is a direct bolt-in solution that delivers next-level strength and reliability. The HD60 features our massively reinforced rotated 60-series high-clearance center section, 3.5-inch tubes, chromoly axles, and Currie heavy-duty forged inner knuckles that accept the factory outer JK steering and brake assemblies. Upgrade to an HD60 and enjoy your off-road adventures without worrying about front-end failure.

Details:

• 65.375 in. Factory JK Width
• 4.88 Gear Ratio
• Eaton ELocker
• HD60 High-Clearance Center Section with Rotated Cover Improves Obstacle Slide-Over
• High Volume Flow-Thru Pinion Oiling System Keeps Bearings Bathed in Cool Oil
• Rock Slider Low-Friction Skid Plate Glides Over Rocks
• 3.5 x .375-inch DOM Axle Tubes are Twice the Strength of the Stock Tubes
• Currie Chromoly 35-Spline Inner and 32-Spline JK Outer Axles
• Currie Heavy-Duty Forged JK Inner Knuckles
• Currie Heavy-Gauge Laser Cut Brackets
• Upgraded 1350 Pinion Yoke
• Currie Rock-Proof Nodular Iron Differential Cover
• Satin Black Powder Coat Finish For Long Lasting Protection
• Retains the Vehicle's Stock Outer Steering Knuckles, Brake Assemblies, and Wheels
• Requires Aftermarket High-Clearance Tie Rod Assembly (see note below)

The Currie HD60 front axle assembly for 2007 thru 2018 Wrangler JK/JKU is a direct bolt-in solution that delivers next-level strength and reliability. The HD60 features our massively reinforced rotated 60-series high-clearance center section, 3.5-inch tubes, chromoly axles, and Currie heavy-duty forged inner knuckles that accept the factory outer JK steering and brake assemblies. Upgrade to an HD60 and enjoy your off-road adventures without worrying about front-end failure.

Details:

• 65.375 in. Factory JK Width
• 5.13 Gear Ratio
• Eaton ELocker
• HD60 High-Clearance Center Section with Rotated Cover Improves Obstacle Slide-Over
• High Volume Flow-Thru Pinion Oiling System Keeps Bearings Bathed in Cool Oil
• Rock Slider Low-Friction Skid Plate Glides Over Rocks
• 3.5 x .375-inch DOM Axle Tubes are Twice the Strength of the Stock Tubes
• Currie Chromoly 35-Spline Inner and 32-Spline JK Outer Axles
• Currie Heavy-Duty Forged JK Inner Knuckles
• Currie Heavy-Gauge Laser Cut Brackets
• Upgraded 1350 Pinion Yoke
• Currie Rock-Proof Nodular Iron Differential Cover
• Satin Black Powder Coat Finish For Long Lasting Protection
• Retains the Vehicle's Stock Outer Steering Knuckles, Brake Assemblies, and Wheels
• Requires Aftermarket High-Clearance Tie Rod Assembly (see note below)